Tag: PCB Assembling

Learning About The Basic PCB Fabrication Techniques For Quality Outputs

The processes used in printed circuit board fabrication are individually important due to their unique functions. In fact, all PCBs are designed with bonded layers of copper sheets over the substrates. The etching process, for instance, should carefully be done in order to get rid of redundant copper once the temporary mask is applied. PCBNet wants you to understand that there are lots of important things you need to know so that you can keep up with the modern PCB fabrication industry. You will surely learn best insights to help your business grow while enjoying cost efficient solutions.

Step By Step Procedures

PCBWith the availability of numerous methods to start the process of PCB fabrication, you will need to give importance to some etching basics. However, the most frequent method that electronic hobbyists and tech companies use is the hydrochloric acid or ferric chloride for etching. Both options are actually cheap and abundant so you don’t need to worry anything about finding this in your local market. Just dip the printed circuit board onto the solution while making sure that it is constantly moving inside.

After a while, you can take the PCB out of the solution once you see that the copper layers are removed. Then you can rub the board using some acetone in order to get rid of black color and give way for a shiny PCB finish. If you have completely etched your PCB, rest assured that your PCB layout is now ready for the drilling process which is actually the next step. When it comes to PCB drilling, you need to secure the components on the multi-layered board. But take note that vias drilling is the perfect choice for a perfectly drilled PCB.

It should look like annular rings drilling the pated-through hole. Small drill bits formed out of the tungsten carbide are then used during the drilling process. But generally, “dremel drill press” is used in punching the holes in the board. Also, take note of the 0.035-inch bit used in most of the PCBs fabricated today. High-volume manufacturing typically uses automated drilling equipment so that timely delivery of the products will be met. At times, tiny holes are drilled using mechanical methods which lastingly damage PCBs so be sure you are doing it correctly. In this case, you will need to use a laser-drilled Vias to produce interior-surface finish within the holes.

How Conductor Plating Is Done

After drilling, you are now on the conductor plating stage of PCB fabrication. This method creates outer layers that contain copper connections within the board but don’t allow “solder ability” of each component. To solder the components, you will need a plated nickel, tin, or gold as the surface of the board material. The solder resist is essential in covering other areas that are not soldered. Basically, this is a “polymer coating” which averts the soldered parts from giving visible traces while making “shortcuts” to close by component leads.

The PCB testing process will determine capacity of the PCBs. In most industrial applications, printed circuit boards are assessed with the use of various methods like “Bed of Nails” test, CT scan, “Rigid Needle” adaptor, and many more. However, the fundamental of each test consist of a computer program that initiate the electrical assessment unit in order to apply smaller voltages onto the contact points. This will then verify the certainty of voltage which appear on the contact points being tested.

What To Expect After Following The Basics

Finally, the PCB assembling takes place after the above mentioned steps. This process includes electronic components assembly using PCB holes. It can be efficiently done through the help of through-hole structure or the surface mount structure. Through-hole construction integrates component leads which are inserted onto the drilled holes. The surface mount construction is done by using a pad that contains legs which resemble the inserted board layout. The ICs are positioned on top of each IC while the components leads are mechanically and electrically placed on the PCB with the help of a molten metal bond. In order to get more insights and tips on the basics PCB fabrication, you can follow this link and learn more techniques to meet your exact requirements.


PCB Fabrication is a multi-step process that is mostly carried by machines. PCB Fabrication are ready and able to produce the finest quality products that our customers have come to expect. Visit our website www.pcbnet.com for more details.